Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on a Volvo V90?

Model: Volvo V90 MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

Video tutorial

It will be possible to completely turn off the Service light from the instrument panel of the Volvo V90 by turning on the car's instrument panel, allowing access to the menu indicated on the instrument panel: you will need to press and hold the button located on the left spoke of the steering wheel.

At this point, while continuing to hold the button, you should press the button to turn on the instrument panel: this way, you will see that the Information light on the instrument panel will start to flash.

By releasing the button after about 4 seconds of the light flashing, you will notice that it will turn off.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on the Volvo V90
How to Reset the Maintenance Light on the Volvo V90
Volvo V90 (2016-2024 / MK 1) In this brief guide, you will find instructions to reset the maintenance light on the Volvo V90. First, get inside the vehicle and turn on the igniti…
How to Reset the Service Light on the Volvo V90?
How to Reset the Service Light on the Volvo V90?
Volvo V90 (2016-2024 / MK 1) You can clear the Service light on the Volvo V90 by pressing and holding the button located at the bottom of the left steering wheel spoke. While hol…
How to Reset the Service Light on a Volvo V90
How to Reset the Service Light on a Volvo V90
Volvo V90 (2016-2024 / MK 1) Let's go over the information and steps to reset the service light for the routine maintenance oil change on the Volvo V90. First, get in the vehicle…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos