Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the steering wheel and airbag of the Volvo XC60.

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Steering wheel

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the steering wheel and its airbag of the Volvo XC60, by first disconnecting the battery to avoid short circuits. First of all, we get into the car and start to release and remove the steering wheel airbag, disconnecting the electrical connector that we find on the back; then we unscrew the central screw of the steering wheel to remove it, as shown in the video.

At this point, if necessary, we replace the steering wheel and its airbag, centering the steering wheel and making the electrical connection of the airbag.


Posted on 2 February 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
Where Are the Fuses Located in the Volvo XC60?
Where Are the Fuses Located in the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In the Volvo XC60, each fuse is contained in one of the designated fuse boxes installed in the vehicle: there are three of them in this type of vehic…

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos