Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : Where are the fuses located in the Volvo XC60?

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 2 - Years 2017-2024
Part: Fuse box
Operation: Where are the fuses located in the Volvo XC60?

In the Volvo XC60, each fuse is contained in one of the appropriate fuse boxes that are installed on the vehicle: on this type of vehicle, three can be identified. The first is located in the interior of the dashboard, immediately behind the glove compartment: it contains the fuses for the interior lights, horn, airbags, etc. The second box is located on the right side of the engine compartment: it contains the fuses for the headlights, windshield wipers, etc. The last box will be found on the left side of the trunk: it contains the fuses for the rear lights, rear window defroster, etc.


Posted on 1 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xc60 2017-2024 - Where are the fuses for the electrical sockets of the Volvo XC60 located? Read Answer
    • Xc60 2017-2024 - Where is the fuse box located in the Volvo Xc60? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos