Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Put the Volvo XC60 Wipers in Service Position

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Windshield wipers

In this video, see how to put the wiper of the Volvo XC60 in service position. The wiper blades must be in this position to perform any type of service, especially to replace the blades, allowing access from the outside of the vehicle without damaging the paint. Attempting to bend the wiper arm without doing this will hit the hood, scratching the finish. Insert the remote inside and press the ignition button: immediately press the wiper lever upward, and this will put the blades in service position. Once finished, simply press the ignition button, and they will return to their place automatically.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
Resetting Maintenance Reminder on Volvo XC60
Resetting Maintenance Reminder on Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Let's go over the steps needed to reset the maintenance reminder on the Volvo XC60. First, get in the vehicle and press and hold the reset button loc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos