Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2014 Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

The procedure to manually reset the service light that stays on in your 2014 first-generation Volvo XC60 is very simple. Just read the following guide carefully and follow the steps described. First, get in the car and make sure the ignition is off. Then, press and hold the button located at the end of the left lever on the steering wheel while turning on the ignition. Wait for the reset of the light to complete, and finally, release the button on the left lever.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
How to Reset the Service Light on the Volvo XC60?
How to Reset the Service Light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on the Volvo XC60, insert the key into the ignition switch and turn it to position 1, which only powers the instrument clu…
Resetting the Service Light on the Volvo XC60
Resetting the Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Follow the procedure to reset the service light for the regular maintenance of the engine oil change on the Volvo XC60. First, get in the vehicle and…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos