Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : To reset the service light on the Volvo XC60.

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Instrument cluster
Operation: To reset the service light on the Volvo XC60.

Resetting the service light on the dashboard of your first generation Volvo XC60 (year 2008-2016) is really simple, and with the following guide, you will be able to complete the operation without any difficulty, even if you don't have much experience or familiarity with this type of intervention. First of all, you need to enter the interior of the vehicle, and make sure that the dashboard is turned off. Then, press and hold the button located below the tachometer, specifically to the right of it. At the same time, turn on the dashboard and wait for the reset to complete.


Posted on 30 October 2023 by ScegliAuto



How to reset the "Service" light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) Good morning, today's guide aims to reset the "Service" light on our Volvo XC60. Before we begin, we should have completed the recommended service. L
How do you reset the Service light on the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In order to reset the Service light of the Volvo XC60, you need to turn on the instrument panel and then connect a diagnostic tool to the OBD port of
How do I reset the Volvo XC60 Service light?
Volvo Xc60 (2008-2016 / MK 1) To reset the Volvo XC60 Service warning light, you have to insert the key in the special lock, pressing the ignition button in position 1, turning on

    Frequently Asked Questions

    • Xc60 2008-2016 - How to service reset a Volvo XC 60? Read Answer
    • Xc60 2008-2016 - What's wrong with the Volvo XC60? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos