|
Do it yourself
| |||
| ||||
How to Change the Oil Filter and Oil in a Volvo V60
Model: Volvo V60
MK 2
- Years 2018-2026
To change the oil and oil filter on your Volvo V60, the steps are very simple and similar to those of many other cars. First, lift the vehicle on ramps to access the underside. Then locate the oil filter and oil pan, which are positioned in a very accessible location. Next, unscrew the filter cap to allow excess oil to drain out, then use the appropriate universal wrench to unscrew the entire filter body in preparation for replacement. After removing the old filter, install the new one, making sure to also replace the gasket for safety. Once this is done, you can reattach your filter. Now, move on to the oil pan. As always, open the cap carefully, using a catch pan to contain the oil that spills out. Once the pan is emptied as shown in the video, clean the threads of the cap and the adjacent area, then close it. After completing these steps, you can finally add new oil to your vehicle.
Posted on 11 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Volvo V60
(2010-2018 /
MK 1)
In this video, you will learn how to perform routine maintenance by replacing the engine oil and oil filter of the first series Volvo V60. First, ope…
Volvo V60
(2018-2026 /
MK 2)
In this brief and simple guide, learn how to reset the service light for the regular oil change maintenance on the Volvo V60 by following the instruc…
Volvo V60
(2010-2018 /
MK 1)
Good morning, today we are here to discover the location of the fuse box of our Volvo V60 and how to reach it. Let's start by opening the front engin…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |