|
Do it yourself
| |||
| ||||
|
Let's see how to protect the edge of the trunk of the Volvo V60 with a transparent PPF (Paint Protection Film). We can find a roll measuring 50x500 mm, made of self-adhesive nano-ceramic anti-UV material on AliExpress with the code 1005005896656990 for the price of 13.82 euros with free shipping. For application, it is essential to work in a clean environment. It should be dry and dust-free, at a temperature between 18 and 25°C, and avoid direct sunlight. We wash the trunk bumper with car detergent, rinse, and dry it thoroughly. Then we wipe it down with isopropyl alcohol to ensure it is properly degreased. As shown in the video, we apply painter's tape to outline the area to be protected. If we are applying the film with the adhesive side, we should start applying the tape from the inside and then carefully stretch it out, using a dry sponge to push out the air, moving outward. We will then cut the tape to size with a utility knife. Once it is attached, we go over it with a squeegee, always starting from the center, to remove any wrinkles and air bubbles. The paint protection lasts up to 10 years and respects the aesthetics of the vehicle.
Posted on 8 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Volvo V60
(2010-2018 /
MK 1)
In this tutorial we can see how to reset the onboard computer in the Volvo V60, an extremely simple and quick operation to be carried out for example…
Volvo V60
(2018-2026 /
MK 2)
If a device in your Volvo V60 suddenly stops working, the first thing to do is check the status of the respective fuses, which are outlined in this v…
Volvo V60
(2018-2026 /
MK 2)
In this video, we can see where the fuse boxes of the Volvo V60 are located and what their corresponding diagrams are, useful in case we need to chec…
Other guides you may be interested in |
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
