Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V60
    4. : Distribution of fuses on a Volvo V60

Volvo V60 - Video tutorial

Model: Volvo V60 MK 1 - Years 2010-2018
Part: Fuse box
Operation: Distribution of fuses on a Volvo V60

In today's video guide, we are shown the distribution of fuses on a first-generation Volvo V60, a specific model produced from 2010 to 2014. These diagrams accurately show the name, location, and amperage of each individual fuse and relay. We also see the location of the fuse boxes. The first box is located under the passenger side glove compartment, behind the footwell trim. The second box is found inside the engine compartment on the left, and finally the third and last fuse box is positioned under the trunk panel, to the left of the spare tire.


Posted on 5 May 2024 by ScegliAuto



What is the fuse diagram for the Volvo V60?
Volvo V60 (2010-2018 / MK 1) If some devices in our Volvo V60 have suddenly stopped working, we can first check the status of the corresponding fuses whose diagrams are indicated
What is the fuse diagram for the Volvo V60?
Volvo V60 (2018-2024 / MK 2) In case a device in our Volvo V60 suddenly stops working, the first thing we can do is check the status of the respective fuses whose diagrams are in
How to replace the timing belt of the 2017 Volvo V60.
Volvo V60 (2010-2018 / MK 1) With the help of this video tutorial, we will explain how to replace the timing belt of the 2017 Volvo S60. The first thing to do is to remove the fr

    Frequently Asked Questions

    • V60 2018-2025 - What is the cigarette lighter fuse in the Volvo V60? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos