Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : How to check the oil level on Volvo XC60

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Oil pan
Operation: How to check the oil level on Volvo XC60

In this video you can see how you can check the oil level on Volvo XC60. First enter the vehicle and secure the vehicle; you need to turn on the ignition in position one, without starting the engine; secondly, press OK on the control lever, as shown in the video, and go until you see the oil symbol characterized by an ampoule on the display. Turn on the ignition in position two, remember as before not to press the clutch or brake pedal; now press OK, at this point the message Oil level OK appears on the display; Now you can turn off the ignition.


Posted on 16 March 2024 by ScegliAuto

This video is currently unavailable


How to check the engine oil level in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial we can see how to check the oil level in the Volvo XC60, a very simple and quick operation. In this model there is no dipstick, the
How to check the AdBlue level of the Volvo XC60 MK2
Volvo Xc60 (2017-2024 / MK 2) Some latest generation diesel engines, such as those installed on the Volvo XC60, use a liquid AdBlue injection in the exhaust system to keep emissio
How do you top up the engine oil of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In order to perform an oil refill for the Volvo XC60 engine, you need to open the hood so that you can access the components located inside the engin

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos