Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V60
    4. : How do you replace the fuel filter of the Volvo V60?

Volvo V60 - Video tutorial

Model: Volvo V60 MK 1 - Years 2010-2018
Part: Diesel filter
Operation: How do you replace the fuel filter of the Volvo V60?

To replace the diesel filter of the Volvo V60, you need to lift the car so that you can access the components located in the lower part of the engine compartment. Here, it will be possible to locate the filter housing, which can be removed by loosening the screw that fixes it and removing the old filter inside. Once the filter has been removed, it will be possible to insert the new one into its seat, fixing it with the cover. When the installation is complete, you will need to start the car to verify that everything is working correctly.


Posted on 22 June 2023 by ScegliAuto

    Frequently Asked Questions

    • V60 2018-2025 - Where is the fuel filter located on the Volvo V60? Read Answer
    • V60 2018-2025 - How to change the diesel filter in the Volvo V60? Read Answer
    • V60 2010-2018 - How to replace the diesel filter in the Volvo V60? Read Answer
    • V60 2018-2025 - When should the diesel filter on a Volvo V60 be replaced? Read Answer
    • V60 2010-2018 - Where is the diesel filter located on Volvo V60? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos