Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V60
    4. : How to replace the cabin air filter on Volvo V60

Volvo V60 - Video tutorial

Model: Volvo V60 MK 1 - Years 2010-2018
Part: Cabin air filter
Operation: How to replace the cabin air filter on Volvo V60

The cabin air filter inside your Volvo V60 first series is a very important component that ensures optimum quality of the air you breathe. For this reason it is important to replace it in a timely and periodic manner. Let's find out how. First, turn off the car and park it safely. Immediately afterwards, reach the passenger side and completely remove the plastic panel located under the glove compartment. Once this is done, locate the filter box and remove the lid. Finally, replace the existing filter with the new one.


Posted on 10 November 2022 by ScegliAuto



How do I replace the cabin filter on the Volvo V60?
Volvo V60 (2010-2018 / MK 1) In order to replace the cabin filter of the Volvo V60 you have to open the glove box on the passenger side and loosen the screws located at its base
How do you replace the fuel filter of the Volvo V60?
Volvo V60 (2010-2018 / MK 1) To replace the diesel filter of the Volvo V60, you need to lift the car so that you can access the components located in the lower part of the engine
How to reset the service light on the Volvo V60?
Volvo V60 (2010-2018 / MK 1) Resetting the service in the Volvo V60, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have c

    Frequently Asked Questions

    • V60 2010-2018 - Where is the cabin pollen filter of a Volvo V60 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos