Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Air filter

Let's see how to replace the engine air filter on a Volvo XC90. First, open the hood and notice that the air filter assembly is located on the front left side of the engine compartment: it is a rectangular black plastic box. On the airbox cover, there are six Torx T25 screws distributed along the perimeter. These are self-tapping screws, so it is not necessary to unscrew them completely; just loosen them. Lift the cover and place it to the side, leaving it attached to the intake tube. Remove the old filter and clean the housing thoroughly of dust and debris, then take the new filter and pay attention to the orientation of the arrows, which should point toward the engine. Align the filter properly in the box and then close the cover, fastening the screws without overtightening.

Posted on 6 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuse Box in the Volvo XC90
Where to Find the Fuse Box in the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To locate the fuse box inside your first-generation Volvo XC90 (year 2002-2014), follow these simple steps. First, reach the driver's seat and leave …
How to Replace the Exterior Rearview Mirror on a Volvo XC90
How to Replace the Exterior Rearview Mirror on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To replace the exterior rearview mirror on a Volvo XC90, loosen the screws that secure the door panel to its housing so that it can be removed. Once …
How do you replace the battery of the Volvo XC90?
How do you replace the battery of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to replace the battery on the Volvo XC90, you need to open the rear hatch so that you can access the components inside the trunk: here you w…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos