Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Volvo XC90?

Model: Volvo Xc90 MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, we will see how to replace the cabin filter in the Volvo XC90, an operation that is extremely simple and quick. First, let's go to the passenger side, then position ourselves under the dashboard and remove the lower cover of the glove compartment by unscrewing the corresponding screws with a T25 Torx key. Next, we locate the long rectangular door, unlock the two clips, open it, and remove the old filter.

At this point, all that remains is to clean the housing of any dirt residue, insert the new filter, and reassemble everything by following the reverse procedure.


Posted on 13 December 2025 by ScegliAuto


Related tutorials

Where is the Cabin Air Filter Located in the Volvo XC90?
Where is the Cabin Air Filter Located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this video, you can see where the cabin air filter is located in the Volvo XC90 and how to replace it, a very simple and quick operation. As shown…
How to Replace the Fuel Filter on a Volvo XC90?
How to Replace the Fuel Filter on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) The fuel filter on a Volvo XC90 is located at the bottom of the vehicle, between the driver’s door and the rear passenger door. There will be a prote…
Where is the Fuel Filter Located in the Volvo XC90?
Where is the Fuel Filter Located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In this video, you can see where the fuel filter is located in the Volvo XC90 and how to proceed if you need to replace it. As shown, it is positione…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos