Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aux Adapter Accessory Kit and Radio Removal

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Dashboard

Detach the plastic cover on the center console around the gear shift and rotate it 90° counterclockwise. Then, unscrew the four screws securing the climate control panel and remove it from its location, positioning it to the side without disconnecting the connectors. At this point, remove the radio, disconnect the connector at the bottom left, and connect the iPod adapter module, securing it with double-sided tape to the radio housing and routing the Aux output cable through the glove compartment. Reassemble everything in reverse order.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Car Radio for iPod Kit Installation
Removing Car Radio for iPod Kit Installation
Volvo Xc90 (2002-2014 / MK 1) Using a plastic tool to avoid damaging the body, pry at the base of the tunnel around the shifter to release the plastic clips and move it aside to a…
How to Reset the Onboard Computer
How to Reset the Onboard Computer
Volvo Xc90 (2002-2014 / MK 1) The video shows how to reset the indication that appears on the display of the onboard computer in your vehicle when performing maintenance. Generall…
Instructions for Removing Car Radio
Instructions for Removing Car Radio
Volvo Xc90 (2002-2014 / MK 1) Position the gear shift lever in reverse to facilitate the removal of the car radio. Detach the trim (wood insert in this case) around the gear shift…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos