Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Speakers of the Volvo V40

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Accessory kit

See other generations:
Video tutorial

Using a simple flathead screwdriver, lift the protective grille in front of the speaker. It is held in place by clips, so when you hear the clicks, it will be detached.

Now, unscrew the screws located at the four corners of the speaker to extract it. Also, disconnect the connector at the back to remove it completely and install the new speaker. For reassembly, simply reverse the steps described above.

If necessary, perform the same procedure on the other side.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Replacing the rear brake pads on a Volvo V40 MK2
Replacing the rear brake pads on a Volvo V40 MK2
Volvo V40 (2012-2019 / MK 2) In this video tutorial, you will learn how to remove and replace the rear brake pads and handbrake pads on a Volvo V40 second series. First, lift the…
How to Replace the Battery in a Volvo V40?
How to Replace the Battery in a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To replace the battery in a Volvo V40, open the bonnet to access the components inside the engine compartment. Here, detach the plastic cover at the …
How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) The Service light on the Volvo V40 can be reset by turning on the instrument cluster with the ignition key and then holding down the OK button locate…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos