Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the rear brake pads on a Volvo V40 MK2

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Brake pads

In this video tutorial, you will learn how to remove and replace the rear brake pads and handbrake pads on a Volvo V40 second series. First, lift the vehicle and start by removing the rear wheel; then unscrew the rear caliper bolts using a 7 mm hex key, as illustrated in the video. At this point, remove the metal clips from the brake pads and extract the caliper; then remove and replace the pads inside, cleaning the caliper of any residual dirt; finally, reassemble everything!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo V40 (2012-2019 / MK 2) In this tutorial, see how to replace the rear brake pads on a Volvo V40, a very simple operation. First, lift the side you will be working on, taking…
Volvo V40 (1995-2012 / MK 1) To replace the rear brake pads on the Volvo V40, you need to lift the car so that the corresponding rear wheel is not in contact with the ground. The…
Volvo V40 (2012-2019 / MK 2) To change the rear wiper on your Volvo V40, first, obtain the replacement part. You can find it on Amazon, with the code B079S2MQMQ. The cost is £6.1…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos