Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the remote control battery of a Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Key

Through this very useful video guide today, we can see the entire operation necessary to replace the battery of the remote control of a Volvo V40, second series model in production from the year 2012 to the year 2019. Very well, let's start by pulling the release lever of the physical key and then extracting it, then insert a small flathead screwdriver into the key housing just removed and lever to open the remote control as shown in the video. Once this is done, we can remove the old exhausted battery and finally replace it with a new one. The necessary battery is the CR2430.

Posted on 22 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the remote control for the Volvo V40?
How do you replace the battery of the remote control for the Volvo V40?
Volvo V40 (1995-2012 / MK 1) To replace the battery of the Volvo V40 remote control, you need to loosen the screw located at the bottom of the device: once this has been removed,…
How to Replace the Remote Control Battery of the Volvo V40?
How to Replace the Remote Control Battery of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) The method for replacing the remote control batteries of the Volvo V40 is identical to that of the XC60, C40, and other similar models. The type of b…
How to change the battery of the Volvo V40 remote control
How to change the battery of the Volvo V40 remote control
Volvo V40 (1995-2012 / MK 1) Replacing the battery of the key for the Volvo V40, produced from 2000 to 2004, is an operation that follows a very simple procedure that can be done…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos