Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V40
    4. : How do you replace the battery of the Volvo V40 remote control?

Volvo V40 - Video tutorial

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Key
Operation: How do you replace the battery of the Volvo V40 remote control?

In order to replace the battery of the Volvo V40 remote control, you need to slide the key out from the top of the device. Once it is removed, you can pry open the two halves of the remote control. The battery inside can now be taken out from its compartment and replaced with a new one. After the replacement, you can close the remote control again. At this point, you can use the buttons to verify that the device is functioning correctly.


Posted on 10 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos