Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Control Battery of the Volvo V40?

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

The method for replacing the remote control batteries of the Volvo V40 is identical to that of the XC60, C40, and other similar models. The type of battery to use in this remote is CR2450: this is a button battery that is slightly larger than the standard size.

Start by sliding down the spring-loaded button located at the bottom of the remote while simultaneously pulling out the emergency blade, as shown in the video. Use the back of the blade to lever and open the remote.

Now that the battery is exposed, remove it and replace it with the new one, then close the remote again and reposition the emergency blade.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Volvo V40 Mk2
Volvo V40 (2012-2019 / MK 2) This guide shows how to replace the remote battery on a Volvo V40 Mk2. The first step is to slide out the physical key using the release lever on the…
How to Replace the Remote Key Battery of the Volvo V40?
How to Replace the Remote Key Battery of the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To replace the battery of the remote key for the Volvo V40, slide the key out from the top part of the device. Once removed from its housing, you can…
How to replace the remote battery on a Volvo V40?
How to replace the remote battery on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) Replacing the remote battery on a Volvo V40 is a very simple and quick operation; let's see how to proceed in the attached video tutorial. You will n…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos