Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo V40?

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

The Service light on the Volvo V40 can be reset by turning on the instrument cluster with the ignition key and then holding down the OK button located at the end of the lever on the left of the steering wheel. This will cause a red light to start flashing, and when it disappears completely, you can turn off the instrument cluster.

At this point, turn it back on to confirm that the Service light has disappeared from the instrument cluster. You can verify that the light is gone by turning the cluster off and on again.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Volvo V40?
How do you reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) From the instrument panel of the Volvo V40, it will be possible to completely remove the Service light that appears when turning on the instrument pa…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the service light on a Volvo V40, turn on the instrument cluster by turning the key, then press and hold the "OK" button located at the end …
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn the ignition on by rotating the key. Then, press and hold the OK button located at the end of the l…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos