Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

From the instrument panel of the Volvo V40, it will be possible to completely remove the Service light that appears when turning on the instrument panel by turning the key, and then holding down the OK button located at the end of the lever to the left of the steering wheel. In this way, a red light will start flashing, and when it is completely erased, the instrument panel can be deactivated. At this point, it will need to be reactivated, confirming that the Service light has disappeared from the instrument panel. The reset can be verified by turning off and on the instrument panel.

Posted on 21 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, insert the key into the ignition switch, but do not turn on the instrument panel. Then, press and hold t…
How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) On the Volvo V40, to reset the Service light, turn on the instrument cluster by turning the ignition key in the ignition switch, then press and hold …
How to Reset the Service Light on the Volvo V40?
How to Reset the Service Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, turn on the instrument cluster by turning the key in the lock and then press and hold the OK button loca…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos