Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Setting the clock on a Volvo XC90

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: -board computer
Operation: Setting the clock on a Volvo XC90

Let's see through this very short video tutorial today all the steps to follow to change the time on our first-generation Volvo XC90, a model produced from 2002 to 2014. As shown in the video, the operation is really very simple and we can do it in just a few seconds, but let's see the procedure now. Let's start by inserting the ignition key and turning it to the first position to turn on the vehicle's instrument panel without starting the engine. Then, we use the button on the right side of the speedometer to change the time.


Posted on 20 November 2023 by ScegliAuto



Where is the fuse box located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To locate the fuse box inside your first-generation Volvo XC90 (year 2002-2014), simply follow these simple steps. First, sit in the driver's seat an
How do you replace the battery of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to replace the battery on the Volvo XC90, you need to open the rear hatch so that you can access the components inside the trunk: here you w
How do you adjust the handbrake of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to adjust the handbrake of the Volvo XC90, you need to remove the protective panel on the left side of the center console. This panel can be

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos