Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in a Volvo XC90?

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Instrument cluster

In this tutorial, you will see how to remove the instrument cluster in a Volvo XC90, a very simple and quick operation. First, ensure the vehicle is off for safety. Then, locate the two screws on the upper inner side of the cluster and remove them using a T25 Torx wrench. Next, disengage the upper cover of the steering column, remove the trim, and continue by unscrewing the additional four screws indicated. At this point, simply pull the cluster out of the dashboard, disconnect the connector, and install the replacement if necessary, following the reverse procedure.

Posted on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC90?
How to Reset the Service Light on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To reset the Service light on a Volvo XC90, insert the ignition key into the ignition switch so that it can be turned to power on the instrument clus…
How to Reset the Service Light on a Volvo XC90?
How to Reset the Service Light on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To clear the Service light from the instrument cluster of the Volvo XC90, press and hold the button located on the left side of the steering wheel wh…
Resetting the Maintenance Interval on the Volvo XC90
Resetting the Maintenance Interval on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Next, you will learn how to reset the maintenance interval on the Volvo XC90. First, get in the vehicle and turn on the ignition, navigating to the T…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos