Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing Car Radio

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Car stereo

Position the gear shift lever in reverse to facilitate the removal of the car radio. Detach the trim (wood insert in this case) around the gear shift lever and remove the two screws securing the center console located at the bottom of the switch panel, where the cigarette lighter is. At this point, you can extract the car radio along with the climate control buttons by first pulling out the lower part and then the upper part: during this phase, be careful not to damage the trim of the center tunnel (protect it with a cloth or masking tape if necessary).

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Car Radio for iPod Kit Installation
Removing Car Radio for iPod Kit Installation
Volvo Xc90 (2002-2014 / MK 1) Using a plastic tool to avoid damaging the body, pry at the base of the tunnel around the shifter to release the plastic clips and move it aside to a…
How to Remove the Exterior Door Handle on a Volvo XC 90
How to Remove the Exterior Door Handle on a Volvo XC 90
Volvo Xc90 (2002-2014 / MK 1) In today's video, you will see the main instructions for removing the exterior door handle on a first-generation Volvo XC 90. First, open the front d…
Installation of Aux Adapter Accessory Kit and Radio Removal
Installation of Aux Adapter Accessory Kit and Radio Removal
Volvo Xc90 (2002-2014 / MK 1) Detach the plastic cover on the center console around the gear shift and rotate it 90° counterclockwise. Then, unscrew the four screws securing the c…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos