Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : How do I remove the radio from the Volvo XC90?

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Car stereo
Operation: How do I remove the radio from the Volvo XC90?

In order to remove the radio from the Volvo XC90 you have to pry under the cover that wraps the gear lever, in order to free it from its retaining clips and remove it completely. In this way, it will be possible to loosen the screws located in the lower part of the car radio, previously covered by the plastic. Once these screws have been loosened, it will be possible to slide the car radio out of its housing and remove it by disconnecting the connectors connected at the top. After removal, it will be possible to replace all the spare parts by connecting them to the connectors and fixing them with the appropriate screws.


Posted on 11 March 2024 by ScegliAuto



Disassembly Radio, Volvo Xc90 central control unit
Volvo Xc90 (2002-2014 / MK 1) In this video tutorial we will see how to disassemble the car radio and center console of a Volvo Xc90. First we get inside the car, using a plastic
Where is the fuse box located in the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To locate the fuse box inside your first-generation Volvo XC90 (year 2002-2014), simply follow these simple steps. First, sit in the driver's seat an
How do you replace the battery of the Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) In order to replace the battery on the Volvo XC90, you need to open the rear hatch so that you can access the components inside the trunk: here you w

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos