Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Radio, Central Control Unit Volvo XC90

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the radio and central console of a Volvo XC90. First, get inside the vehicle with a plastic trim tool; then remove the trim pieces located at the bottom of the gear shift and use a Torx screwdriver to unscrew the screws found under the panels.

At this point, gently pull out the entire central part of the console and disconnect all the electrical connectors at the back by prying or pushing on the tabs with something sharp.

Remove everything and follow the video until the end!


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Disable the Stability Control on a Volvo XC90
How to Disable the Stability Control on a Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Today, we will illustrate how to disable the stability control on a Volvo XC90; it is advised not to disable this function while driving, as it may c…
How to replace the battery of the 2019 Volvo XC90 remote control
How to replace the battery of the 2019 Volvo XC90 remote control
Volvo Xc90 (2015-2026 / MK 2) To replace the battery of the 2019 Volvo XC90 remote control, we need a flathead screwdriver and a CR2032 battery. To replace the battery, we need to…
How to reset the malfunction and engine control light of the Volvo XC90
How to reset the malfunction and engine control light of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In this brief guide, we will see the instructions that will allow us to reset the malfunction and engine control warning light of the Volvo XC90. Bef…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos