Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Stability Control on a Volvo XC90

Model: Volvo Xc90 MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

Today, we will illustrate how to disable the stability control on a Volvo XC90; it is advised not to disable this function while driving, as it may compromise the vehicle's road handling. So, get inside the vehicle and start the ignition and engine; from the central display, go to the vehicle settings and then to the controls, pressing the ESC Off option to temporarily disable the stability control, as shown in the video.

Pressing the option again will enable the stability control.


Posted on 17 August 2026 by ScegliAuto


Related tutorials

How to Disable the Alarm on a Volvo XC90?
How to Disable the Alarm on a Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) This video tutorial explains how to disable the alarm on a Volvo XC90, not under normal operation of the key/remote, but when the battery is dead and…
How to replace the battery of the 2019 Volvo XC90 remote control
How to replace the battery of the 2019 Volvo XC90 remote control
Volvo Xc90 (2015-2026 / MK 2) To replace the battery of the 2019 Volvo XC90 remote control, we need a flathead screwdriver and a CR2032 battery. To replace the battery, we need to…
How to reset the malfunction and engine control light of the Volvo XC90
How to reset the malfunction and engine control light of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In this brief guide, we will see the instructions that will allow us to reset the malfunction and engine control warning light of the Volvo XC90. Bef…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos