Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the control unit located in the Volvo V40 2015?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Control unit

If you don't know where the control unit of your Volvo V40 second series (year 2015) is located, don't worry because in the following guide we will describe all the steps you need to take to find it in a few minutes and in total safety. First of all, park on a flat surface and turn off the car completely. At this point, go outside and remove the left front wheel arch. Once removed, also remove the lower part of the bumper and then locate the control unit you were looking for. To remove it, simply disconnect the electrical cables present.

Posted on 4 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box Located in a Volvo V40?
Where is the Fuse Box Located in a Volvo V40?
Volvo V40 (2012-2019 / MK 2) The Volvo V40 has two fuse boxes. The first fuse box is located inside the cabin, specifically behind the glove compartment on the passenger side. Th…
Where is the Fuel Filter Located on a Volvo V40?
Where is the Fuel Filter Located on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this video, you can see where the fuel filter is located on a Volvo V40 D2 and how to remove it, useful if you want to carry out maintenance witho…
In the 2012 Volvo V40, How to Reset the Service Light?
In the 2012 Volvo V40, How to Reset the Service Light?
Volvo V40 (2012-2019 / MK 2) Watch the short video above to get an idea of how, just like any other car, the engine oil change is performed on the 2012 Volvo V40. Any other inter…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos