Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. V40
    4. : Where is the fuel filter located in the Volvo V40?

Volvo V40 - Video tutorial

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Diesel filter
Operation: Where is the fuel filter located in the Volvo V40?

In this video we can see where the fuel filter is in the Volvo V40 D2 and how to remove it, useful in case we want to carry out maintenance without having to go to the workshop. As we can see in the second part of the video, the filter is located inside the engine compartment, in the back, right near the windshield. The filter is covered by a metal plate, held in place by 3 10mm bolts. Once unscrewed, lift the plate, disconnect the connector and the two pipes. Remember to clean any remaining fuel in the engine compartment once the job is finished.


Posted on 29 May 2022 by ScegliAuto

    Frequently Asked Questions

    • V40 2012-2019 - Where is the fuel filter located in the Volvo V40? Read Answer
    • V40 2012-2019 - What is the location of the fuel filter on the Volvo V40? Read Answer
    • V40 2012-2019 - How often do you change the diesel filter on Volvo V40? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos