Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the diesel filter in the Volvo V40 D3?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Diesel fuel filter

The diesel filter is a consumable material, comparable to the oil filter, the oil itself, the air filter, and so on. After a certain number of kilometers traveled, it is necessary to proceed with its replacement, following the indications of the manufacturer. In the Volvo V40 d3, this filter is located in the rear of the car, under the tank, secured by a bolted bracket. First, the inlet and outlet pipes of the diesel must be disconnected, the electrical connector must be removed, the aforementioned bracket must be removed, and finally, the new filter must be installed.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the diesel fuel filter of the Volvo V40 1.6D.
Replacement of the diesel fuel filter of the Volvo V40 1.6D.
Volvo V40 (2012-2019 / MK 2) Below are the instructions necessary to disassemble and replace the diesel filter of the Volvo V40 1.6D, following these simple steps. First, we open…
How to replace the diesel fuel filter of the Volvo V40 2.0D
How to replace the diesel fuel filter of the Volvo V40 2.0D
Volvo V40 (2012-2019 / MK 2) Today, we will see the necessary steps to disassemble and replace the diesel filter of the Volvo V40 2.0D. First, open the hood of the car and locate…
How to Replace the Diesel Filter on a Volvo V40
How to Replace the Diesel Filter on a Volvo V40
Volvo V40 (2012-2019 / MK 2) To replace the diesel filter on a Volvo V40, open the bonnet to detach the plastic cover from the top of the engine block. Once removed, disconnect t…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos