Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter on the Volvo V40 2.0D

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

Today, we will go through the steps necessary to dismantle and replace the diesel filter on the Volvo V40 2.0D. First, open the bonnet of the vehicle and locate the diesel filter situated at the top right of the engine bay; then disconnect the pipes by pressing on the tabs, followed by disconnecting the electrical connector, as shown in the video.

Now remove the diesel filter from the bracket, replacing the cartridge with the new original one; remount and reconnect the new filter, applying the reverse procedure!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on the Volvo V40 1.6D
Replacing the Diesel Filter on the Volvo V40 1.6D
Volvo V40 (2012-2019 / MK 2) Below are the necessary instructions to remove and replace the diesel filter on the Volvo V40 1.6D, following these simple steps. First, open the bon…
How to Replace the Diesel Filter on a Volvo V40 D3?
How to Replace the Diesel Filter on a Volvo V40 D3?
Volvo V40 (2012-2019 / MK 2) The diesel filter is a consumable item, similar to the oil filter, the oil itself, the air filter, and so on. After a certain number of miles driven,…
How to Replace the Diesel Filter on a Volvo V40
How to Replace the Diesel Filter on a Volvo V40
Volvo V40 (2012-2019 / MK 2) To replace the diesel filter on a Volvo V40, open the bonnet to detach the plastic cover from the top of the engine block. Once removed, disconnect t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos