Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Filter on a Volvo V40

Model: Volvo V40 MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Diesel fuel filter

See other generations:
Video tutorial

To replace the diesel filter on a Volvo V40, open the bonnet to detach the plastic cover from the top of the engine block. Once removed, disconnect the connectors attached to the diesel filter, which is located at the top right of the engine.

This will allow the filter to be extracted from its housing and replaced with a new part. After the replacement, reconnect the new filter and reattach the engine block cover.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

Volvo V40 (2012-2019 / MK 2) Today, we will go through the steps necessary to dismantle and replace the diesel filter on the Volvo V40 2.0D. First, open the bonnet of the vehicle…
Volvo V40 (2012-2019 / MK 2) Below are the necessary instructions to remove and replace the diesel filter on the Volvo V40 1.6D, following these simple steps. First, open the bon…
Volvo V40 (2012-2019 / MK 2) The diesel filter is a consumable item, similar to the oil filter, the oil itself, the air filter, and so on. After a certain number of miles driven,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos