Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Bonnet Support Struts

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Body

The rear bonnet support struts are actually gas springs that allow you to operate the opening and closing of the bonnet, providing a push during opening and support during closing to prevent it from falling accidentally while open or slamming shut. These struts are secured with spherical hinges held in place by a metal clip: to replace them, simply remove the clip and detach the spherical hinge (during this operation, support the bonnet with something like a broom handle).

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Bonnet Support Strut
Replacing the Front Bonnet Support Strut
Volvo S40 (1995-2004 / MK 1) If the front bonnet tends to fall when opened, it means the support strut has lost its ability to hold it up and needs replacing: this is a gas sprin…
Dismantling Front Headlamp Lens
Dismantling Front Headlamp Lens
Volvo S40 (2004-2012 / MK 2) Once the front headlamp is removed, unclip the metal clips that secure the lens to the plastic support. Use a heat gun to warm the adhesive along the…
How to Replace the Oil Filter on a Volvo S40
How to Replace the Oil Filter on a Volvo S40
Volvo S40 (2004-2012 / MK 2) How to replace the oil filter on a Volvo S40? Follow this guide: Open the car door and pull up the engine compartment release lever located at the bo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos