Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Third Brake Light Bulb Replacement

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Light bulb

To avoid rear-end collisions, it is advisable to check the stop lights as well. If the third brake light is burnt out, it is best to replace it. The operation is very simple and easily executable. Open the boot and remove the cover of the light unit by pulling it out sideways. Remove the plastic clips that secure the light unit. Release the retaining springs, locate the burnt bulb, and replace it with a new one, ensuring it is the same model. The specifications of the bulb can be found stamped on its body, indicating the voltage and wattage. Refit the light unit, ensuring it is secure, and test the light.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of Rear Headlight Lights on Volvo S40
Disassembly of Rear Headlight Lights on Volvo S40
Volvo S40 (2004-2012 / MK 2) Are the rear headlight bulbs damaged? Let's remove the bulbs from above inside the lights. Lift the boot lid, then remove the fabric/plastic cover lo…
Replacing the Courtesy Light Bulb
Replacing the Courtesy Light Bulb
Volvo S40 (1995-2004 / MK 1) The following video tutorial shows how to replace the courtesy light bulb located in the passenger compartment of a Volvo S40 on the passenger side. …
Replacement of Rear Number Plate Light
Replacement of Rear Number Plate Light
Volvo S40 (1995-2004 / MK 1) To access the number plate light bulb, open the boot and remove the carpet lining; at this point, you can extract the bulb holder and proceed with re…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos