Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of Rear Headlight Lights on Volvo S40

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Tail light bulb

Are the rear headlight bulbs damaged? Let's remove the bulbs from above inside the lights. Lift the boot lid, then remove the fabric/plastic cover located on the side of the side trim. Release the plastic clips of the bulb holder, disconnect the power connectors attached to the bulb holder. Replace the damaged bulbs with new ones (same voltage) at hand. Reassemble the bulb holder and secure the plastic clips. Refit the inspection cover and close the boot lid. Turn on the instrument panel and test the lights.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Volvo S40?
How do you replace the headlight bulb of the Volvo S40?
Volvo S40 (2004-2012 / MK 2) It will be possible to replace the headlight bulb of the Volvo S40 by opening the hood, so that it is possible to loosen the screws that secure the h…
Replacement of the air conditioning compressor of the Volvo S40
Replacement of the air conditioning compressor of the Volvo S40
Volvo S40 (2004-2012 / MK 2) These brief and simple instructions will allow us to dismantle and replace the air conditioning compressor of the Volvo S40. First, let's lift the ve…
Where is the Fuse Box on a 2007 Volvo S40?
Where is the Fuse Box on a 2007 Volvo S40?
Volvo S40 (2004-2012 / MK 2) To access the fuse box on your Volvo S40, follow the simple procedure described in this guide. First, ensure you park on a flat surface and completel…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos