Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : Front headlight disassembly instructions

Volvo S40 - Video tutorial

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Headlight
Operation: Front headlight disassembly instructions

In order to disassemble the front light, it is first necessary to remove the indicator light: therefore unscrew the fixing screw of the indicator light, extract it from its seat and disconnect the bulb holder (bayonet coupling); then disconnect the sockets connected to the headlight bulbs by removing the protective cap and then that of the headlight adjustment motor; then unscrew the fixing pins of the headlight (two on the side of the arrow light and one on the radiator side; at this point it is possible to extract the headlight from its seat and proceed backwards to install the new one: if this is not equipped with a motor for adjustment, apply that of the old headlight if it works.


Posted on 13 August 2023 by ScegliAuto



Rear light disassembly instructions
Volvo S40 (1995-2004 / MK 1) In order to disassemble the rear light, it is first necessary to remove some of the lining elements inside the luggage compartment: start by removing
Car radio disassembly instructions
Volvo S40 (2004-2012 / MK 2) The disassembly of the stock car radio is very simple, it only requires a little caution in removing the plastic parts that are fixed through pressur
Removing the front headlight lens
Volvo S40 (2004-2012 / MK 2) Once the headlight has been removed, unhook the metal claws that secure the lens of the headlight to the plastic support. With a hair dryer, heat the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos