Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cooling Radiator on a Volvo XC90 2.5L

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Radiator

Today's main instructions will guide you through removing and replacing the cooling radiator on a Volvo XC90 2.5L. First, open the hood of the vehicle and begin disconnecting the radiator hose, draining the fluid into a container. Next, remove the screws from the radiator fan and disconnect its electrical connector. At this point, unscrew the bolts from the radiator brackets to remove it and replace it with a new original one. Reinstall the radiator and make all connections, topping off with coolant before and after.

Posted on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radiator on a Volvo XC90
Replacing the Radiator on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the cooling radiator on a Volvo XC90, following the instructions below. First, li…
How to Replace the Heater Core in a Volvo XC90
How to Replace the Heater Core in a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To replace the heater core in the Volvo XC90, access the lower part of the engine compartment. Remove the screws that secure the heater core from the…
How and When to Replace the Timing Belt on the Volvo XC90
How and When to Replace the Timing Belt on the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today, let's go over the procedure and instructions on how and when to remove and replace the timing belt on the Volvo XC90. For the diesel engine, t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos