Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Core in a Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Heater core

To replace the heater core in the Volvo XC90, access the lower part of the engine compartment. Remove the screws that secure the heater core from the outside. Next, disconnect the side panel of the driver's footwell to access the components inside. You will find the heater core, which needs to be freed from its mounting bolts and disconnected from the hoses. This will allow you to remove the old heater core from its housing and replace it with a new one.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cooling Radiator on a Volvo XC90 2.5L
How to Replace the Cooling Radiator on a Volvo XC90 2.5L
Volvo Xc90 (2002-2014 / MK 1) Today's main instructions will guide you through removing and replacing the cooling radiator on a Volvo XC90 2.5L. First, open the hood of the vehicl…
Replacing the Radiator on a Volvo XC90
Replacing the Radiator on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the cooling radiator on a Volvo XC90, following the instructions below. First, li…
How to Replace the Tail Light on a Volvo XC90?
How to Replace the Tail Light on a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the tail light on a Volvo XC90, open the trunk and lift the carpet to detach the internal cover corresponding to the light to be removed. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos