Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Radiator

Volvo Xc90 - Radiator

Radiator Volvo Xc90 (2002-2014 / mk 1)

Volvo Xc90 (2002-2014 / MK 1)
How to Replace the Cooling Radiator on a Volvo XC90 2.5L
Today's main instructions will guide you through removing and replacing the cooling radiator on a Volvo XC90 2.5L. First, open the hood of the vehicle and …Read all…
Posted on 10 March 2026 by ScegliAuto
Volvo Xc90 (2002-2014 / MK 1)
Replacing the Radiator on a Volvo XC90
In today's tutorial video, you will learn how to remove and replace the cooling radiator on a Volvo XC90, following the instructions below. First, lift the …Read all…
Posted on 22 July 2026 by ScegliAuto
Shocks (1) Car stereo (4) Battery (9) Ignition coil (1) Control arm (3) Spark plugs (3) Body (1) Key (15) Trunk lock (1) Timing belt (9) Onboard computer (6) Checks and maintenance (12) Dashboard (1) Shifter boot (1) Bearing (1) Brake rotors (2) Headlight (1) Tail light (2) Fog lights (1) Air filter (3) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (4) Oil filter (1) Parking brake (7) Window switch (1) Accessory kit (1) Light bulb (2) Side marker bulb (2) Headlight bulb (6) Tail light bulb (3) Antifreeze coolant (1) Handle (6) Engine oil (4) Clock (2) Door trim panel (5) Brake pads (1) Shift knob (1) Car door (1) Instrument cluster (2) Radiator (2) Heater core (1) Fuse box (10) Seat (2) Suspension system (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (6) (18) Tire pressure warning light (2) Service warning light (63) Fuel cap (2) Windshield wipers (4) Tie rods (1) Drivetrain (1) Center console tunnel (1)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos