Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Brake pads

Volvo Xc90 - Brake pads

Brake Pads Volvo Xc90 (2002-2014 / mk 1)

Volvo Xc90 (2002-2014 / MK 1)
Brake Pad Replacement
Lift the vehicle on a lift and remove the front wheels after removing the protective caps from the mounting pins. Unscrew the mounting pins of the brake …Read all…
Posted on 6 February 2026 by ScegliAuto
Shocks (1) Car stereo (4) Battery (9) Ignition coil (1) Control arm (3) Spark plugs (3) Body (1) Key (15) Trunk lock (1) Timing belt (9) Onboard computer (7) Checks and maintenance (13) Dashboard (1) Shifter boot (1) Bearing (1) Brake rotors (2) Headlight (1) Tail light (2) Fog lights (1) Air filter (3) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (4) Oil filter (1) Parking brake (7) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (1) Light bulb (2) Side marker bulb (2) Headlight bulb (6) Tail light bulb (3) Antifreeze coolant (1) Handle (6) Engine oil (4) Clock (2) Door trim panel (5) Brake pads (1) Shift knob (1) Car door (1) Instrument cluster (2) Radiator (2) Heater core (1) Fuse box (10) Seat (2) Suspension system (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (6) (1) Tire pressure warning light (21) Service warning light (69) Fuel cap (2) Windshield wipers (4) Tie rods (1) Drivetrain (1) Center console tunnel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos