Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Brake rotors

Volvo Xc90 - Brake rotors

Brake Rotors Volvo Xc90 (2002-2014 / mk 1)

Volvo Xc90 (2002-2014 / MK 1)
How to Replace the Rear Brake Rotors on a Volvo XC90
This guide will show the complete procedure for replacing the rear brake rotors on a Volvo XC90. Note that this guide is not valid for models after 2014. To …Read all…
Posted on 28 July 2026 by ScegliAuto
Volvo Xc90 (2002-2014 / MK 1)
Replacing Rear Brake Rotors and Pads
To facilitate the replacement of the rear brake rotors and pads, lift the vehicle on the lift and remove the rear wheel; take off the plastic protective caps …Read all…
Posted on 28 February 2026 by ScegliAuto
Shocks (1) Car stereo (4) Battery (9) Ignition coil (1) Control arm (3) Spark plugs (3) Body (1) Key (15) Trunk lock (1) Timing belt (9) Onboard computer (7) Checks and maintenance (13) Dashboard (1) Shifter boot (1) Bearing (1) Brake rotors (2) Headlight (1) Tail light (2) Fog lights (1) Air filter (3) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (4) Oil filter (1) Parking brake (7) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (1) Light bulb (2) Side marker bulb (2) Headlight bulb (6) Tail light bulb (3) Antifreeze coolant (1) Handle (6) Engine oil (4) Clock (2) Door trim panel (5) Brake pads (1) Shift knob (1) Car door (1) Instrument cluster (2) Radiator (2) Heater core (1) Fuse box (10) Seat (2) Suspension system (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (6) (1) Tire pressure warning light (21) Service warning light (69) Fuel cap (2) Windshield wipers (4) Tie rods (1) Drivetrain (1) Center console tunnel (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos