Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Fuel cap

Volvo Xc90 - Fuel cap

Fuel Cap Volvo Xc90 (2002-2014 / mk 1)

Volvo Xc90 (2002-2014 / MK 1)
How to Repair the Fuel Cap on Volvo XC90
In this guide, we will see the instructions that will allow us to repair the fuel cap or tank of the Volvo XC90, specifically repairing the sealing cable of …Read all…
Posted on 5 June 2026 by ScegliAuto
Volvo Xc90 (2002-2014 / MK 1)
How to Open the Fuel Door When It's Stuck on a Volvo XC90?
On the Volvo XC90, the fuel door may get stuck due to a faulty release button or lock actuator. In such cases, you can still perform an emergency opening by …Read all…
Posted on 9 October 2026 by ScegliAuto
Shocks (1) Car stereo (4) Battery (9) Ignition coil (1) Control arm (3) Spark plugs (3) Body (1) Key (15) Trunk lock (1) Timing belt (9) Onboard computer (7) Checks and maintenance (13) Dashboard (1) Shifter boot (1) Bearing (1) Brake rotors (2) Headlight (1) Tail light (2) Fog lights (1) Air filter (3) Cabin air filter (6) Fuel filter (1) Diesel fuel filter (4) Oil filter (1) Parking brake (7) Grille (1) Fuel injectors (1) Window switch (1) Accessory kit (1) Light bulb (2) Side marker bulb (2) Headlight bulb (6) Tail light bulb (3) Antifreeze coolant (1) Handle (6) Engine oil (4) Clock (2) Door trim panel (5) Brake pads (1) Shift knob (1) Car door (1) Instrument cluster (2) Radiator (2) Heater core (1) Fuse box (10) Seat (2) Suspension system (1) Side mirror (2) AdBlue warning light (1) Warning light – error code (6) (1) Tire pressure warning light (21) Service warning light (69) Fuel cap (2) Windshield wipers (4) Tie rods (1) Drivetrain (1) Center console tunnel (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos