Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Rear bumper

To replace the rear bumper on a Volvo XC60, open the trunk and loosen the two screws located at the base of the opening, near the seal. Next, loosen all the screws found inside the wheel wells and at the bottom of the bumper. Once all screws are loosened, you can unclip the retaining clips and detach the bumper. Before fully removing it, disconnect its connectors. Finally, the new bumper can be connected to the connectors and secured with the appropriate bolts.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of the Volvo XC60?
How to Remove the Rear Headlight of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the rear headlight of the Volvo XC60, open the trunk to access the screws located next to the headlight, which are covered by the trunk lid…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
How to disassemble the rear light of the Volvo XC60
How to disassemble the rear light of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today we will discover the information and instructions that will allow us to disassemble and replace the rear taillight of the Volvo XC60. First, we…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos