Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Volvo XC 60

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Front bumper

To remove the upper portion of the bumper, remove the clips under the hood. Remove the left fender by taking out all the screws you find, then do the same for the right fender. To do this, turn the wheel all the way inward for maximum accessibility. Before disconnecting the electrical connectors for the headlight washers, it is advisable to remove the negative terminal of the battery. Keep the radio code handy if necessary in this case. After you have disconnected all the wires and electrical plugs, you can remove the bumper, which also includes the front grille.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bumper on a Volvo XC60?
How to Replace the Rear Bumper on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the rear bumper on a Volvo XC60, open the trunk and loosen the two screws located at the base of the opening, near the seal. Next, loosen …
Replacing the Windshield Washer Fluid Reservoir on the Volvo XC60
Replacing the Windshield Washer Fluid Reservoir on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today, let's go through the steps to remove and replace the windshield washer fluid reservoir on the Volvo XC60. First, open the hood of the vehicle …
How to Remove the Rear Headlight of the Volvo XC60?
How to Remove the Rear Headlight of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the rear headlight of the Volvo XC60, open the trunk to access the screws located next to the headlight, which are covered by the trunk lid…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos