Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windshield Washer Fluid Reservoir on a Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014

Today, let's learn how to disassemble and replace the windshield washer fluid reservoir on a Volvo XC90. First, open the hood of the vehicle and start removing the front bumper by unscrewing all the mounting screws; unscrew the additional screws located on both sides of the front wheel wells, prying at the sides to detach and remove the bumper. At this point, disconnect the hoses from the washer fluid reservoir, also disconnecting the washer pump; unscrew the screws to remove and replace the reservoir with a new one, refill with new fluid, and check its operation before reassembling everything.

Posted on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windshield Washer Fluid Reservoir on a Volvo XC90
How to Replace the Windshield Washer Fluid Reservoir on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) To replace the windshield washer fluid reservoir on a Volvo XC90, loosen the screws that secure the front bumper to its housing. Once these screws ar…
Replacing the Radiator on a Volvo XC90
Replacing the Radiator on a Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In today's tutorial video, you will learn how to remove and replace the cooling radiator on a Volvo XC90, following the instructions below. First, li…
Coolant Reservoir Replacement
Coolant Reservoir Replacement
Volvo Xc90 (2002-2014 / MK 1) Open the hood and ensure it is securely supported. Locate the coolant reservoir at the rear left (when facing the engine), detach it by pulling it up…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos