Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Water Pump on the Audi Q5?

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Pump

See other generations:
Video tutorial

To replace the water pump on the Audi Q5, lift the vehicle and remove the cover panel from the bottom of the engine compartment. Once removed, disconnect the coolant hose attached to the side of the engine.

The water pump can now be freed from its housing, and its pulley should be detached from the timing belt. You can then install the new component by reassembling all previously removed parts.


Posted on 3 October 2026 by ScegliAuto


Related tutorials

Audi Q5 (2008-2017 / MK 1, 8R) Attention, replacing the water pump and timing belt on an Audi Q5 2.0 TDI is not something to be taken lightly, but if you have some experience with …
Audi Q5 (2017-2025 / 80A, MK 2) Today's guide will show you how to remove and replace the timing belt on the Audi Q5 2.0 TDI. The manufacturer states that for this type of engine, t…
Audi Q5 (2017-2025 / 80A, MK 2) In this video, we can see how important it is to keep the timing belt of an Audi Q5 under control, even if we are far from the minimum mileage that t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Warning Light on the MG HS

When the tyre warning light (TPMS) illuminates on the dashboard of your new MG HS, it means the vehicle's control unit has detected a puncture or abnormal pressures. Below, we will discover what you need to do to quickly and easily eliminate this warning light. First, pay attention to the sticker located on the side of the door and note the recommended tyre pressures, then proceed to inflate or replace the tyres if there is a puncture. At this point, start the car and drive a few miles to force a new data reading.

Watch the video!


by ScegliAuto

More videos