Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the water pump for the Audi A3 1.4 TFSI.

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the water pump of the Audi A3 1.4 TFSI. First, let's open the hood of the vehicle and start by removing the air filter box, then disconnecting the coolant hose (allowing it to drain into a container); after that, we will remove the thermostat assembly, unscrewing the screws of the water pump to remove it as well, as shown in the video.

We will replace the water pump with a new original one and then top up with the new coolant.


Posted on 9 December 2025 by ScegliAuto


Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) This guide shows how to replace the high-pressure fuel pump of the Audi A3 8v TFSI. The first step is to secure the vehicle and then open the engine …
Audi A3 (2003-2013 / 8P, MK 2) In this guide, we will outline the main instructions for removing and replacing the timing chain on an Audi A3 1.4 TFSI. First, open the engine bonne…
Audi A3 (2012-2019 / 8V, MK 3) Today's main instructions will show you how to remove and replace the timing belt and water pump on the Audi A3 1.6 TDI, as well as the Volkswagen Go…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos