Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Air filter

Today we will explain how to replace the air filter of the Audi A3 diesel model mk2 on your own. To replace the filter, we need to open the front hood and using a Phillips screwdriver, unscrew the six screws on the filter flange. Remove the air tube by levering with a flat-head screwdriver and a pair of pliers; bring the two ends of the support ring closer to release it and slide it towards the air duct. Remove the access duct and the flange to extract the air filter. Clean the filter box from any remaining impurities inside and insert the new air filter making sure the rubber edge is inserted. Mount the flange and proceed with inserting the tube. Using pliers, reposition the air inlet duct and screw the support ring, using pliers and a screwdriver. Screw the six screws of the flange and connect the ventilation tube.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fuel Filter on Audi A3 2.0
Replace the Fuel Filter on Audi A3 2.0
Audi A3 (2012-2019 / 8V, MK 3) Want to replace the diesel filter on your Audi A3? Let's go through the disassembly of all the parts to remove the diesel filter. Lift the front bonn…
How to Replace the Fuel Filter on an Audi A3?
How to Replace the Fuel Filter on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To replace the fuel filter on an Audi A3, lift the car using a ramp and position a tray under the filter to collect any spilled fuel. Next, disconnec…
How to replace the cabin air filter of the Audi A3
How to replace the cabin air filter of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) In the following mini guide, we will help you complete the replacement of the cabin air filter in your Audi A3. First of all, make sure you have purc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos