Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

See other generations:
Video tutorial

Today's main instructions will show you how to remove and replace the timing belt and water pump on the Audi A3 1.6 TDI, as well as the Volkswagen Golf. First, open the bonnet of the vehicle and start by removing the diesel filter, disconnecting the pipes and unscrewing the bracket screw; then raise the vehicle and disconnect the auxiliary belt, subsequently removing the engine mount and the timing cover, as shown in the video.

At this point, take the necessary references for replacing the timing belt, following the video to the end!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
How and When to Replace the Timing Belt of the Audi A3 2.0 TDI
Audi A3 (2012-2019 / 8V, MK 3) Below are the instructions on how and when to replace the timing belt on the Audi A3 2.0 TDI (and other models with the same engine); the manufacture…
How to replace the timing belt on the Audi A3 2.0 TDi?
How to replace the timing belt on the Audi A3 2.0 TDi?
Audi A3 (2003-2013 / 8P, MK 2) To replace the timing belt on the Audi A3 2.0 TDi, open the bonnet to access the components inside the engine bay. This will allow you to remove obst…
When Should I Change the Timing Belt on My Audi A3 with a 1.6 TDI Engine? And How Can I Do It Myself?
When Should I Change the Timing Belt on My Audi A3 with a 1.6 TDI Engine? And How Can I Do It Myself?
Audi A3 (2003-2013 / 8P, MK 2) For your Audi A3 with a 1.6 TDI engine, it is recommended to replace the timing belt after 93,000 miles or after 6 years of use. Do not exceed these …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos